Yamaha VXC2P 2.5" Full-Range Dante/PoE Powered Ceiling Speaker

The Yamaha VXC2P is a 2.5" full-range Dante/PoE powered ceiling speaker that's part of the ADECIA conference system which provides a wide selection of speakers, microphones, and other technologies. The speaker is simple to install and seamlessly connects with any Dante device. It creates enhanced flexibility for there ADECIA configuration, which is optimized for performance in conference rooms. A single PoE+ network cable connection avoids complex wiring and enables audio control via Dante, while the full-range, bass-reflex, powered speaker provides 160° horizontal directivity angle for a large coverage area. The VXC2P includes a magnetic grille, a safety cable, and a cutout template.

Dante/PoE Powered Ceiling Speaker System

With audio distributed via a Dante network and PoE power supplied from a PoE compliant L2 switch, the speaker system can be constructed as a network, allowing existing IT infrastructure to be effectively utilized. Simple wiring via LAN cables, easy installation, and no need for a power amp contribute to the flexibility of installation, allowing you to construct an elegant sound system that will not interfere with the design of the conference room.

Enhanced Speaker Product Range for ADECIA Solution

As a speaker for ADECIA Solution, VXC2P can be used for applications not covered with the existing VXL1-16P network speaker. In some cases, ceiling speakers are convenient for the divided / combined room integration that is in increasing demand. Additionally, high-quality sound can be provided by combining Yamaha's experience in speaker technology with the adjustment of signal processing, such as volume, gain and EQ of individual ceiling speakers.

• Part of ADECIA Conference System
• Wide 160° Conical Coverage
• 2.5" Full-Range Driver
• Seamless Installation
• Works with Dante Output Device
• 15W Power Capabilities
• Low Profile for Limited Plenum Space
• Comprehensive Protection Circuits
• Includes Mag Grille, Cutout Templates
• Includes Safety Wire

Technical Specifications

• Speaker type: Full-range bass-reflex powered speaker
• Frequency range (-10dB): 80Hz-20kHz
• Nominal coverage: 160°conical
• Component configuration: 2.5 inch (6.4 cm) full-range driver
• Maximum output level: 97 dB SPL
• Power rating
  • Dynamic: 15W (PoE+(IEEE802.3at)), 6W (PoE(IEEE802.3af))
  • Continuous: 15W (PoE+(IEEE802.3at)), 6W (PoE(IEEE802.3af))
• Dimensions (Φ x D): Φ 8.86 inches × D 5.24 inches (Including grill)
• Weight: 4.19 lbs (including grille)
• In Operation
  • Temperature: 32° - 140° F
  • Humidity: 30% - 90% (non-condensing)
• Storage
  • Temperature: -4° - 140° F
  • Humidity: 20% - 90% (non-condensing)
• Finish: White
• I/O connectors: RJ-45 (PoE/Dante) x1
• Controls: 8-switch DIP switch × 1
• Indicators: Power (front), SYNC (RJ-45), LINK/ACT (RJ-45)
• Protection circuit
  • Speaker processing: Overheating protection, overpower output protection, overvoltage input protection
  • Amplifier protection: Overheating protection, short circuit protection, DC detection protection, overvoltage protection, undervoltage protection
  • Power supply protection: Overcurrent protection, overheating protection
• Cooling: Natural air cooling
• Power requirements: PoE+ (IEEE 802.3at), PoE (IEEE 802.3af)
• Power consumption: Idle : 4.0W, 1/8 : 6.2 W (PoE+ (IEEE 802.3at)), 4.9 W (PoE (IEEE 802.3af))
• Maximum power consumption: 25.5 W (PoE+ (IEEE 802.3 at)), 12.95 W (PoE (IEEE 802.3 af))
• Magnetic shielding: Non-magnetic shielding type
• Dust and water resistant: Non-compliant
• Certificate: VCCI, UL2043 (with Terminal cover) *U.S.A., Canada and Mexico models only
• Signal Processing: EQ/Enhancer, Volume, PEQ, Ducker (noise gate), Mixer, Delay, Speaker EQ (6 band)
• Options: Reinforcing bracket kit AB-C2
• Accessories: Grille, cutout template, safety wire, Owner’s Manual, Safety Guide, Installation/Dimensional diagrams