Verkada GC31 Outdoor Cellular Gateway

The GC31 and GC31-E Cellular Gateways make it simple to deploy Verkada products anywhere with power and cell signal, including hard-to-wire locations such as parking lots, construction sites, or streetlight poles.

Simply feed the GC31 any power input and it will send both power and data to any Verkada device via PoE. Like all Verkada products, the GC31 is cloud-managed and natively integrates with other devices in our ecosystem. And with Verkada’s unlimited data plan, which works out-of-the-box in many countries throughout the world, customers no longer need to work with cell carriers.

Installation Guide (Click Here)

Key Features

• Flexible power options - Use any power input, including terminal block, barrel jack, and PoE. The gateway has two PoE outputs that provide up to 60W total.
• Verkada data plan or BYO plan - Eliminate complexity with the Verkada data plan or bring your own plan. The Verkada plan offers truly unlimited data, multicarrier redundancy, and 24/7 support.
• Deploy anywhere - The GC31 comes in both indoor and outdoor versions that cover almost any environment and installation scenario, including pole, roof, wall, and tabletop.
• Cloud-managed - Set up and manage the GC31 in Verkada Command from any device and any location. See all your gateways on a map, run diagnostics, and receive alerts if connectivity is lost.
• Remote troubleshooting - Remotely power cycle the GC31 and any connected devices via Command. If the gateway itself is offline, it will automatically power cycle itself after 30 minutes.
• Optimized data usage - The GC31 optimizes streaming, cloud backup, and other activities on downstream Verkada devices to reduce data usage and improve the viewing experience. 
• Deploy anywhere - The Verkada Cellular Gateway comes in both indoor and outdoor versions that cover a wide range of installation scenarios. The GC31-E outdoor model is IP66 rated and can be easily mounted on a pole, wall or roof. The GC31 indoor model can be wall mounted or secured on a tabletop using the Kensington lock.

Technical Specifications

• Cellular
  • Connectivity: LTE cellular CAT 12
  • MIMO: 2x2 DL MIMO
  • SIM:
    
    • 2 SIM slots (Nano 4FF)
    • Dual SIM/Auto SIM failover
  • Bands: B1, B2, B3, B4, B5, B7, B8, B12, B13, B14, B17, B18, B19, B20, B25, B26, B28. B29, B30, B38, B39, B40, B41, B42, B43, B48 (CBRS), B66, B71
  • Antennas: 2 x external omni (SMA)
• Inputs and outputs
  • Ethernet: 2 x GigE RJ45 ports (1 x LAN and 1 x WAN/LAN configurable)
  • Power output:
    • 2 x 802.3bt PoE++ capable ports
    • 60W total power budget
  • Power Input:
    • 54V DC Barrel Jack (6.5/3.0mm OD/ID)
    • 100-240V AC/DC power adapter included (region specific)
  • GNSS/GPS: Passive GNSS (GPS, GLONASS, and Galileo)
• Compliance and certifications
  • RF & EMC: FCC, IC, CE, UKCA, RCM, NOM, VCCI
  • Cellular: PTCRB, GCF, Verizon, T-Mobile, AT&T, FirstNet
  • Safety: UL/IEC 62368-1, CSA c22.2 No. 62368-1
• General
  • Power Consumption: 9W
  • Note: Does not include connected devices
  • Dimensions
    
    • Main Unit:
      
      • Length: 125mm / 4.9in
      • Width: 125mm / 4.9in
      • Height: 30mm / 1.2in
    • Antenna:
      
      • Length: 20mm / 0.8in
      • Width: 10mm / 0.4in
      • Height: 136mm / 5.4in
    • Weight: 0.6kg / 1.3lbs
  • Operating Temperature: -10°C to 50°C / 14°F to 122°F
  • Humidity: 5-90% RH non-condensing
  • LEDs: 1 status LED, 2 SIM indicator LEDs, 4 signal strength LEDs
  • Mounting options: Wall mount or tabletop (with Kensington slot)

What's Included

• GC31 Outdoor Cellular Gateway
• 2 x SMA antennas
• AC/DC power adapter and cord
• Mount plate
• 4 x wall anchors
• T10 security torx screwdriver
• 4 M4 x 25mm PH2 wall screws
• RJ45 port cover