The ANIUSB-MATRIX USB Audio Network Interface from Shure is designed for audio/video conferencing installations in small- and medium-size meeting rooms. It can be used to connect 4 Microflex Advanced or Microflex Wireless microphone channels via Dante (4 in/2 out), and provide analog connectivity to a room audio/video conferencing system or a PC-based A/V conferencing application via USB (1 in/out).
An internal matrix mixer offers flexible routing, allowing users to route any input to any output. A 4-band parametric EQ filter is also available on the analog and USB outputs. The ANIUSB-MATRIX is compact and easy to mount without an equipment rack.
- Connects 4 Dante audio inputs and 1 analog input to an A/V conferencing system or a PC-based videoconferencing application
- Flexible signal routing and connectivity: analog audio (1 block in/1 block out) to room A/V conferencing system; USB (1 in/out) to connect to laptop or room PC
- Power over Ethernet (PoE) eliminates the need for an outboard power supply
- Compact form factor is easy to mount without equipment rack
- For Conferencing Applications
- Connects Four Dante Channels
- Flexible Signal Routing and Connectivity
- Power over Ethernet
- Compact Form Fact, Easy to Mount
Technical Specifications
- Inputs (Analog): 1 x 3-pin block connector (active balanced)
- Outputs (Analog): 1 x 3-pin block connector (impedance balanced)
- USB Connection: 1 x USB 2.0, Type-B
- Dante Connection:
- 1 x RJ45
- Channel Count: 4 inputs, 2 outputs
- Polarity: Non-inverting, any input to any output
- Power Requirements: Power over Ethernet (PoE), Class 0 (PoE Plus compatible)
- Power Consumption: 6.5 W maximum
- Application Control: HTML5 browser based
- Operating Temperature Range: 20 to 104°F (-6.7 to 40°C)
- Storage Temperature Range: 20 to 165°F (-29 to 74°C)
- Thermal Dissipation
- Maximum: 6.8 W (23.0 BTU/hr)
- Typical: 6.0 W (20.8 BTU/hr)
- Frequency Response: 20 Hz to 20 kHz +1, -1.5 dB
- Dante Audio Flows: Sampling Rate: 24-bit/48 kHz
- USB Audio: 16-, 24-bit/44.1, 48 kHz
- Latency:
- Does not include Dante latency
- Analog to Analog: 0.98 ms
- Analog to Dante 0.39 ms
- Dante to Analog: 0.72 ms
- Dante to Dante: 0.14 ms
- Dynamic Range:
- 20 Hz to 20 kHz, A-weighted, typical
- Analog to Dante: 113 dB
- Dante to Analog: 117 dB
- Equivalent Input Noise:
- 20 Hz to 20 kHz, A-weighted, input terminated with 150 Ohms
- Line: -86 dBV
- Aux: -98 dBV
- Total Harmonic Distortion (THD): <0.05% @ 1 kHz, 0 dBV input, 0 dB analog gain
- Common Mode Rejection Ratio: >70 dB, 150 Ohms balanced source @ 1 kHz
- Impedance: 10.6 kOhms
- Input Clipping Level:
- Line: +27 dBV
- Aux: +15 dBV
- Output Clip Level:
- Line: +20 dBV
- Aux: 0 dBV
- Mic: -26 dBV
- Digital Signal Processing (DSP):
- Per Channel: Equalizer (4-band Parametric, Analog and USB output channels only), Mute, Limiter, Gain (140 dB range)
- System: Matrix mixer
- Networking: Cat 5e or higher (shielded cable recommended)
- Dimensions: 1.6 x 5.5 x 5.0" (4 x 14 x 12.8 cm)
- Weight: 1.5 lb (672 g)