Kramer KDS-8F Zero Latency 4K HDR SDVoE Video Streaming Transceiver over Fiber Optic

KDS−8F is a high−performance, zero latency, 4K@60Hz (4:4:4) video streaming transceiver for streaming via Ethernet over single−mode and multi−mode optical fiber. KDS−8F can be set as either an encoder or decoder. As an encoder, it encodes and streams the HDMI or DisplayPort input along with IR, RS−232, analog audio and USB, over an IP network. As a decoder, it receives the encoded signal and decodes it for output.

•  High–Performance Video Streaming Transceiver — Streams up to 4K@60Hz (4:4:4) resolution signals over a 10G network interface, providing lossless compression.
•  Maximum Compatibility — Fully standard and compliant SDVoE™ codec, enables compatibility with other software and hardware streaming platforms.
•  HDCP 2.2 Compliant, HDR Support, Genlock and Fastswitch Modes Support.
•  High–Speed 10G Network Switch — Managed switch provides multicast, jumbo frames, IGMP snooping and fast leave.
•  Analog Audio Embedding — Provides an unbalanced analog audio port for embedding audio into the streaming signal.
•  Bi–directional USB over IP.
•  Bi–directional IR and RS–232 over IP — Control an IR or serial device located on the decoder side from the encoder and vice versa.
•  Video Wall Support.
•  Multiview Support.
•  Easy, Cost–Effective Maintenance — LED indicators for main power, Tx/Rx mode setting, HDMI/ DisplayPort video source detection, USB connection and Tx and Rx transmission enable easy local maintenance and troubleshooting.
•  Simple System Management — Remote system management support to enable quick and efficient remote system and device life–cycle management.

Key Features

• User configured as encoder or decoder
• Max resolution — 4K@60Hz (4:4:4)
• Fully standard and compliant SDVoE codec
• USB over IP
• Video wall and multiview support

Technical Specifications

• Inputs:
  
  • 1 HDMI: On a female HDMI connector
  • 1 DisplayPort: On a female DisplayPort connector
  • 1 IR: On a 3.5mm mini jack. If you want to use the IR extension, it is necessary to order these accessories from Kramer: 3300–500028 PT–5R/T IR receiver cable 2m, 3.5mm mini jack, 3300–500029 PT–5R/T IR emitter cable 2m, and a 3.5mm mini jack
• Outputs:
  
  • 1 HDMI: On a female HDMI connector
  • 1 IR: On a 3.5mm mini jack. If you want to use the IR extension, it is necessary to order these accessories from Kramer: 3300–500028 PT–5R/T IR receiver cable 2m, 3.5mm mini jack, 3300–500029 PT–5R/T IR emitter cable 2m, and a 3.5mm mini jack
• Ports:
  
  • 1 SFP+ Fiber: On LC connector(s) for 10GbE Ethernet (MM SFP+ transceiver module included)
  • 1 Unbalanced Stereo Audio: On a 3.5mm mini jack
  • 1 1GbE Ethernet: On an R–J45 connector
  • 1 RS-232: On a 3–pin terminal block connector
  • 3 USB: On female USB type–A connectors
  • 1 USB: On a USB mini connector
• Video: Standards Compliance: 10/12–bit HDR (Point–to–Point and Genlock mode only), HDCP 2.2 &1.4, DVI 1.0,
• Extension Line: Signal Compression: Ultra–light compression, lossless for most content
  Maximum Range in Point–To–Point Mode: Using OM3 multi–mode fiber — 300m (980ft) / Using OM4 multi–mode fiber — 550m (1800ft) / Using single–mode fiber — 30km (18.6 miles)
• Audio: Standards Compliance: Supports pass–through of audio formats including LPCM 2.0/5.1/7.1, Bitstream and HD Bitstream from HDMI sources
• Power:
  
  • Source: 12V DC
  • Consumption: 1A
• Environmental Conditions:
  
  • Operating Temperature: 0 to + 45°C (32 to + 113 °F), 10% to 90%, non–condensing
  • Storage Temperature: –20 to +70°C (–4 to + 158 °F), 10% to 90%, non–condensing
  • Humidity: 10% to 90%, non–condensing
• Product Dimensions: 20.00cm x 23.10cm x 2.50cm (7.87" x 9.09" x 0.98" ) W, D, H
• Product Weight: 1.9kg (4.2lbs) approx.
• Shipping Dimensions: 39.00cm x 20.20cm x 6.20cm (15.35" x 7.95" x 2.44" ) W, D, H
• Shipping Weight: 1.6kg (3.4lbs) approx.

What's Included

• Power adapter
• Multimode SFP+ transceiver module
• Rubber feet