Kramer CON-FIELD Field Assembly Shielded RJ–45 Connectors for CAT Cable

CON−FIELD and CON−FIELD−360 are high−bandwidth, shielded RJ−45 connectors used for terminating Kramer LAN cables. This connector requires no crimping tool to install, and provides fast and reliable termination of shielded twisted−pair cables in the field. The connector is suitable for 10Gb Ethernet (IEEE 802.3an), remote powering (PoE, PoE plus, UPoE) and HDBaseT.

*  CON–FIELD — Fixed connector
*  CON–FIELD–360 — With variable cable entry, 8 positions possible.
*  Robust Zinc Die–cast Housing — For industrial use and a protected latch.
*  Compact Design — Makes the connector multiport–capable while being fully shielded.
*  Easy Assembly — Strain relief snapped on directly to stuffer cap and protected catch, no crimping tool needed.
*  Reconnectable for Reuse.
*  Transmission Characteristics — CAT 6A per ISO/IEC 11801 Ed.2.2:2011–06.
*  Wide Uses — Suitable for 10Gb Ethernet (IEEE 802.3an), remote powering (PoE, PoE plus and UPoE) and HDBaseT.
*  Availability — Both connectors sold in packages of 10

Technical Specifications

* Overall:
* Design: Plug
* Shielding: Shielded
* Transmission Technology: Copper
* Color: Black
* Multi-Port Capability: Yes
* Cable Access/Outlet: CON–FIELD–360: Variable, 8 positions, CON–FIELD: 180°

* Regulatory Performance:
* Category (ISO): 6A
* Category (TIA): 6A
* Class (ISO/IEC): EA
* Remote Powering: Yes
* POE/POE Plus: IEEE 802.3af/IEEE 802.3at
* UPOE: Yes
* HDBaseT: Yes
* Transmission Rate Up to 10GBIT: IEEE 802.3an

* Construction:
* Housing: GD–Zn (Zinc die–cast)
* Contacts: : CuSn (tinned bronze)
* Contact Finish: Ni + Au (nickel–gold)
* Latch: Plastic

* Regulatory:
* General Requirements: ISO/IEC 11801 Ed. 2.2:2011–06
* General Requirements: DIN EN 50173–1:2011–09
* General Requirements: TIA/EIA 568–C
* Office Buildings: ISO/IEC 11801 Ed. 2.2:2011–06
* Office Buildings: DIN EN 50173–2:2011–09
* Office Buildings: TIA/EIA 568–C
* Industrial Areas: ISO/IEC 24702
* Industrial Areas: DIN EN 50173–3:2011–09
* Industrial Areas: TIA/EIA 1005
* Residential Areas: ISO/IEC 15018
* Residential Areas: DIN EN 50173–4: 2011–09
* Residential Areas: TIA/EIA 570–B
* CE: Compliant
* ROHS: Compliant

* Diameters:
* Termination, Solid Wire: CONDUCTOR CROSS SECTION AWG: AWG 26/1–22/1
* Termination, Solid Wire: CONDUCTOR CROSS SECTION: 0.128–0.324mm2
* Termination, Solid Wire: CONDUCTOR DIAMETER: 0.409–0.643mm (0.016–0.025")
* Termination, Stranded Wire: CONDUCTOR CROSS SECTION AWG: AWG 27/7–22/7
* Termination, Stranded Wire: CONDUCTOR CROSS SECTION: 0.111–0.355mm2
* Termination, Stranded Wire: CONDUCTOR DIAMETER: 0.457–0.762mm (0.018–0.030")
* Cable Sheath Diameter: 5.5–10.5mm (0.217–0.413")

* Electrical:
* Current: 1A (max)
* Rated Voltage: 50V (max)
* Contact Resistance: 20mΩ (max)
* Insulation Resistance: 500MΩ (min)
* Dielectric Strength: CONDUCTOR–SHIELD: 1500V DC

* Usage and Environmental
* Insertion and Withdrawal Force: 20N max
* Life-Number of Mating Cycles: 750 min
* Strain Relief: Latching clip
* Storage Temperature: –40 — 70°C (–40 — 158°F)
* Operating Temperature: –40 — 70°C (–40 — 158°F)