Crestron DM Essentials 4K60 4:4:4 Transmitter for USB-C DisplayPort Signal Extension over CATx Cable

Crestron DM Essentials 4K60 4:4:4 Transmitter for USB-C DisplayPort Signal Extension over CATx Cable

Crestron
SKU:
HD-TX-4KZ-111

Pricing available upon request

Current Stock:
Description

The HD‑TX‑4KZ‑111 is a DM Lite® 4K60 4:4:4 transmitter designed to interoperate with a DM Lite® receiver or DMPS Lite™ switcher. The HD‑TX‑4KZ‑111 includes a USB-C® input with DisplayPort™ Alt Mode capability, enabling the transmission of a DisplayPort AV signal. A CAT5e or higher twisted pair cable is used to connect the HD‑TX‑4KZ‑111 to the DM Lite receiver or DMPS Lite switcher. For 1080p, WUXGA, and 2K signals, a cable length of up to 230 ft (70 m) is supported. For UHD and 4K signals, a cable length of up to 130 ft (40 m) is supported.

Interoperability with a DM Lite Receiver or DMPS Lite Switcher

The DM Lite output port of the HD‑TX‑4KZ‑111 must be connected to a DM Lite input port of a DM Lite receiver or DMPS Lite switcher. Examples of supported DM Lite 4K60 4:4:4 receivers are the HD‑RX‑4KZ‑101, HD‑RXA‑4KZ‑101, HD‑RXC‑4KZ‑101, and HD‑RXCA‑4KZ‑101. Supported DMPS Lite switchers are the HD‑PS621, HD‑PS622, HD‑PS401, HD‑PS402, and HD‑RX‑4K‑210‑C‑E(‑POE).

Note: When paired with an HD-RX-4K-210-C-E(-POE), the transmitter cannot provide power to the receiver. Power must be connected to the HD-RX-4K-210-C-E(-POE) only.

The HD‑TX‑4KZ‑111 can be configured and controlled only when it is used with a DMPS Lite switcher. The web interface of the switcher can be used to configure the HD‑TX‑4KZ‑111. In addition, control system programming and .AV Framework™ software support of the HD‑TX‑4KZ‑111 is hosted by the switcher.

4K60 4:4:4 and HDR Support

The HD‑TX‑4KZ‑111 supports video resolutions up to 4K60 with 4:4:4 color sampling. HDR10, HDR10+, and Dolby Vision® video formats are also supported.

Compact, Surface‑Mountable Design

Compact in design, the HD‑TX‑4KZ‑111 can be mounted onto a flat surface such as the underside of a table, behind a credenza, or inside a podium. It can also be attached to a single rack rail in the back of an equipment cabinet. The HD‑TX‑4KZ‑111 can receive power from the included power pack or from the remote DM Lite receiver or DMPS Lite switcher.

Key Features

  • Interoperability with a DM Lite® receiver or DMPS Lite™ switcher
  • USB-C® input with DisplayPort™ Alt Mode capability for the point-to-point extension of a DisplayPort AV signal over a CAT5e or higher cable
  • DM Lite transmission distance up to 130 ft (40 m) for UHD and 4K signals or up to 230 ft (70 m) for 1080p, WUXGA, and 2K signals
  • 4K60 4:4:4 capability
  • HDR10, HDR10+, and Dolby Vision® video formats
  • Compliance with HDCP 2.3
  • CEC (Consumer Electronics Control) pass-through capability
  • EDID pass-through capability
  • Compact, surface-mountable design
  • Power from 24VDC power pack (included) or from remote DM Lite receiver or DMPS Lite switcher

Technical Specifications

  • Video
    • Input Signal Type: DisplayPort™ over USB-C® (DisplayPort Alt Mode) with HDR10, HDR10+, Dolby Vision®,
    • Deep Color, and 4K60 4:4:4 support2
    • Output Signal Type: DM Lite® with HDR10, HDR10+, Dolby Vision, Deep Color, and 4K60 4:4:4 support2
    • Copy Protection: HDCP 2.3
    • Resolutions: Common resolutions are listed in the following table.
    • Scan Type Resolution Frame Rate Color Sampling Color Depth
      Progressive 4096x2160 DCI 4K & 3840x2160 4K UHD 24 Hz 4:4:4 12 bit
      30 Hz 4:4:4 12 bit
      60 Hz 4:2:2 12 bit
      60 Hz 4:4:4 8 bit
      2560x1600 WQXGA 60 Hz 4:4:4 8 bit
      1920x1080 FHD 1080p 60 Hz 4:4:4 12 bit
    • Note: The maximum supported resolution is 4K60 with 4:4:4 color sampling. Custom resolutions are supported at pixel clock rates up to 600 MHz.
  • Audio
    • Input Signal Type: DisplayPort over USB-C (DisplayPort Alt Mode)
    • Output Signal Type: DM Lite
    • Digital Formats: Dolby Digital®, Dolby Digital EX, Dolby Digital Plus, Dolby® TrueHD, Dolby Atmos®, DTS®, DTS ES, DTS 96/24, DTS HD® High Res, DTS-HD Master Audio, DTS:X®, LPCM up to 8 channels
  • Communications
    • USB‑C: HDCP 2.3, EDID, CEC pass-through
    • DM Lite: HDCP 2.3, EDID pass-through
  • Connectors
    • USB IN:
      • (1) USB Type‑C® connector, female
        Digital video/audio input using DisplayPort Alt Mode
    • DM LITE OUT:
      • (1) 8‑pin RJ‑45 yellow connector, female, shielded
      • DM Lite output port for connection to a DM Lite receiver or DMPS Lite™ switcher
    • 24V 1.25A:
      • (1) 2.1 x 5.5 mm DC power connector
      • 24VDC power input
      • PW-2420RU power pack included
  • Controls and Indicators
    • LINK: (1) Green LED, indicates that a DM Lite link is established.
    • PWR: (1) LED, indicates that power is being applied to the device. Amber indicates that the device is booting. Green indicates that the device is operational.
    • USB IN: (1) Green LED, indicates that the device is receiving a DisplayPort over USB‑C (DisplayPort Alt Mode) input signal
    • DM LITE OUT:
      • (2) LEDs on RJ‑45 connector.
      • Green indicates that a DM Lite link is established.
      • Flashing amber indicates non‑HDCP video, and solid amber indicates HDCP video.
  • Power
    • Power Pack (Included)
      • Input: 100-240VAC
      • Output: 24VDC 2.5A
      • Model: PW-2420RU
  • Environmental
    • Temperature 32° to 104°F (0° to 40°C)
    • Humidity 20% to 90% RH (non-condensing)
  • Enclosure
    • Chassis: Metal, black finish, vented sides, 2 mounting brackets included
    • Mounting: Freestanding, surface mountable, or attachment to a single rack rail
  • Dimensions
    • Height: 4.13 in. (105 mm)
    • Width: 4.18 in. (106 mm)
    • Depth: 1.08 in. (27 mm)
  • Weight: 11.96 oz (339 g)
Additional Information
Product Type:
Receivers