AMX DXL-TX-4K60 HDBaseT Transmitter

AMX DXL-TX-4K60 HDBaseT Transmitter

AMX
SKU:
FG1010-311

Pricing available upon request

Current Stock:
Description

The AMX DXLite transmitter allows for the distance transport of Ultra high resolution video, embedded audio, bidirectional RS-232 and IR and USB 2.0 over a single category cable. AMX DXLite supports 4K60 4:4:4, HDCP 2.2, and HDR video, providing compatibility with the latest source devices and displays when used with compatible receiving devices.

Ideal for point-to-point solutions in conjunction with the DX-RX-4K60 to bring video and audio from the table to the display, and bring USB 2.0 signals from AMX Acendo video conferencing soundbar or other USB 2.0 based camera/speaker devices back to the table for use by visiting laptops. It is also ideal for use as a distance input into the DXLIte inputs on the AMX Incite All-In-One Presentation Switcher for support of video signals up to 4K60 while receiving power from the Incite DXLite inputs.

Key Features

  • 4K60 4:4:4 Support – Experience pixel-for-pixel video reproduction of 4K60 source video with full 4:4:4 color space.
  • HDCP 2.2 Support – Support the latest source devices.
  • USB 2.0 Distribution – Passes USB 2.0 peripheral devices connected to compatible receivers, such as an AMX Acendo Vibe, mounted near the display.

Technical Specifications

  • HDBaseT Layer Throughput (Max): 10.2 Gbps
  • AC Power: Power Consumption, Local 12V: 12 VDC 2A Max Output; 100-240V 50/60Hz AC Input
  • Supplied (Max): 6.3 w
  • Power Connector: Screw Down Locking Power Connector
  • HDBaseT Power: Power Supplied From a HDBaseT Receiving Device If Available
  • Local Power: Screw Down Locking Power Connector
  • HDBaseT Output Serial: RJ-45
  • Serial: 3 Position 3.5mm Pluggable Phoenix Terminal
  • HDMI Input: HDMI Type A Port
  • USB 2.0 HDBaseT Pass-through:
    • (4) USB Type A Connectorsfor USB Peripheral Devices
    • (1) USB 2.0 Type B Connector For Host Device
    • EitherHost or Peripheral Devices Active Based on Front USB Switch Selection
  • IR RX: 3.5mm Mini-Stereo Jack
  • IR TX: 3.5mm Pluggable Phoenix Terminal Block
  • Power Indicator: Green LED, Solid ON when power is applied
  • Status: Green LED, blinking
  • HDCP Indicator: Yellow LED, Blinking when Non-HDCP, Solid ON when HDCP
  • Link: Green LED, Solid ON when linked to HDBaseT Transmission Source
  • USB Mode Selection: Settable USB Directional Control - Enables USB Host Device or Peripheral Device For USB 2.0 Pass-through Over HDBaseT
  • HDMI
    • Compatible Formats: HDMI , HDCP, DVI (DVI requires conversion cable)
    • Signal Type Support: HDMI, DVI-D (Single Link with a DVI-HDMI Cable Adapter) DisplayPort++ (input only with HDMI cable adapter
    • Input Signal Type: HDMI, HDCP DVI
    • Data Rate (Max): 18 Gbp
    • Pixel Clock (Max): Up to 600 MHz
    • Progressive Resolution Support: 480p up to4096 x 2160@ 60 Hz*
    • HDR Support:
      • HDR 10
      • Dolby Vision (with data rate under 10.2 Gbps) if supported by RX device
    • Color Space Support: RGB 4:4:4 , YCbCr 4:4:4, 4:2:2, and 4:2:0
    • HDBaseT 4K Format Support: 3840x2160p@24/25/30/60 Hz, 4:4:4 4096x2160p@24/25/30 3840x2160p@50/60 Hz, 4:2:0 4096x2160p@50/60 Hz, 4:2:0
    • Audio Format Support: Dolby TrueHD, Dolby Digital, DTS-HD MA, DTS, 2 CH LPCM, 6 CH L-PCM, 8 CH L-PCM Dolby Digital and DTS support up to 48kHz, 5.1 channel
    • HDCP Support: Yes HDCP 1.4, 2.2
  • Signal Transport - HDBaseT
    • Connector: (1) RJ-45
    • Supported Signal Styles: Digital video, audio, bidirectional control, USB 2.0 and power
    • Transport Layer Throughput (Max): 10.2 Gbps
    • Input Formats: Supports 4K60 4:4:4 HDMI 2.0, HDCP 2.2., embedded audio, power, bi-directional control and USB 2.0 passthrough
    • Twisted Pair Cable Type: Shielded Cat6, Cat6A and Cat7 HDBaseT cable runs for equipment shall only be run within a common building where common building is defined as: The walls of the structure(s) are physically connected and the structure(s) share a single ground reference
  • Dimensions:
    • 3.55 in (9.02 cm) depth
    • 9.6 in (24.5 cm) width
    • 1 in (2.5 cm) height
  • Weight: Approx. 1.45 lbs. (.66 kg)
  • Mounting Options: Includes V-Style surface mount brackets