Shure A900W-R-PM Pole Mount Kit With White Cover

Shure A900W-R-PM Pole Mount Kit With White Cover

Shure
SKU:
A900W-R-PM

Pricing available upon request

Up to 2 year(s) limited warranty against manufacturer defects from Shure Singapore. During the warranty period, the manufacturer's appointed authorised service centre will, at its sole discretion (a) repair the product using new or refurbished parts, (b) replace the product with a new or refurbished product.
Current Stock:
Description

The Shure A900-R-PM is a pole mount kit with a white mount cover that allows the MXA920-R conference microphone to be suspended from the ceiling using an NPT pole with a 1.5" diameter (available separately). When paired with the NPT pole of the appropriate length, the kit provides an attractive free-floating mounting solution for a neat and professional look. A VESA mount, screws, and an Allen wrench are provided.

To get started, you will need:

  • A900-PM kit
  • 1.5 in. diameter threaded NPT pole*
    • Must include cable exit
    • Adjustable extension poles with a larger bottom diameter may not fit the round pole mount cover
  • Ethernet cable*

*Not included

  1. Install the Peerless ceiling plate according to the included instructions.
  2. Route the Ethernet cable through the ceiling plate and the pole. Thread the pole onto the ceiling plate.

    An illustration of a Peerless ceiling plate installed on a ceiling with 1.5-in. threaded pipe connected to it.

  3. Thread the VESA bracket onto the pole.

    An illustration showing how to thread the Shure VESA bracket onto installed 1.5-in. threaded pipe.

  4. Partially thread the thumb screws into the microphone.

    An illustration showing how to partially thread 4 thumb screws into mounting holes on the back of MXA901 microphones.

  5. Lift the microphone and align the thumb screws with the holes in the VESA bracket. Tighten the thumb screws to secure the microphone to the VESA bracket.

    Important: Before tightening, make sure that the thumb screws are properly seated in the VESA bracket.

    When installing on short poles, it's easiest to check alignment from the side with the enclosed keyholes.

    Illustration showing how to lift and properly align an MXA901 with the VESA bracket. After aligning, tighten the 4 thumb screws to connect the mic to the bracket.

  6. Rotate the microphone to your preferred position. Tighten the VESA bracket's set screw with the Allen key to lock the position.

    Turn the VESA bracket to change the position of the MXA901. Then use an Allen key and set screw to lock the position of the VESA bracket.

  7. Connect the Ethernet cable to the microphone.

    Illustration showing how to connect Ethernet cable to an MXA901 microphone mounted on 1.5-in. threaded pipe.

  8. Round microphones: Before attaching the pole mount cover, use the Allen key to loosen and remove the installed eyelet screws.

    Snap together the 2 halves of the pole mount cover around the pole. Attach the pole mount cover to the microphone. The cover's 4 clips snap into the 4 square holes on the microphone.

    Tip: To remove the cover, insert a credit card at the embossed triangles to release the clips.

    Illustration showing how to attach the round pole mount cover to Shure's round array microphones.

What's Included

  • Pole mount cover (black or white)
  • VESA bracket and set screw
  • Thumb screws (4)
  • Allen key (M4)
  • Peerless ACC560 ceiling plate and mounting hardware

Illustrated contents of the round A900-PM kit: pole mount cover, VESA bracket, set screw, 4 thumb screws, Allen key, and Peerless ACC560 ceiling plate.

Additional Information
Product Type:
Video Conferencing