Shure ANIUSB-MATRIX USB Audio Network Interface

Shure ANIUSB-MATRIX USB Audio Network Interface

Shure
SKU:
ANIUSB-MATRIX
S$1,240.42 (Inc. GST)
S$1,138.00 (Ex. GST)
Up to 2 year(s) limited warranty against manufacturer defects from Shure Singapore. During the warranty period, the manufacturer's appointed authorised service centre will, at its sole discretion (a) repair the product using new or refurbished parts, (b) replace the product with a new or refurbished product.
Current Stock:
Adding to cart… The item has been added
Description

The ANIUSB-MATRIX USB Audio Network Interface from Shure is designed for audio/video conferencing installations in small- and medium-size meeting rooms. It can be used to connect 4 Microflex Advanced or Microflex Wireless microphone channels via Dante (4 in/2 out), and provide analog connectivity to a room audio/video conferencing system or a PC-based A/V conferencing application via USB (1 in/out).

An internal matrix mixer offers flexible routing, allowing users to route any input to any output. A 4-band parametric EQ filter is also available on the analog and USB outputs. The ANIUSB-MATRIX is compact and easy to mount without an equipment rack.

  • Connects 4 Dante audio inputs and 1 analog input to an A/V conferencing system or a PC-based videoconferencing application
  • Flexible signal routing and connectivity: analog audio (1 block in/1 block out) to room A/V conferencing system; USB (1 in/out) to connect to laptop or room PC
  • Power over Ethernet (PoE) eliminates the need for an outboard power supply
  • Compact form factor is easy to mount without equipment rack
Key Features
  • For Conferencing Applications
  • Connects Four Dante Channels
  • Flexible Signal Routing and Connectivity
  • Power over Ethernet
  • Compact Form Fact, Easy to Mount

Technical Specifications

  • Inputs (Analog): 1 x 3-pin block connector (active balanced)
  • Outputs (Analog): 1 x 3-pin block connector (impedance balanced)
  • USB Connection: 1 x USB 2.0, Type-B
  • Dante Connection:
    • 1 x RJ45
    • Channel Count: 4 inputs, 2 outputs
  • Polarity: Non-inverting, any input to any output
  • Power Requirements: Power over Ethernet (PoE), Class 0 (PoE Plus compatible)
  • Power Consumption: 6.5 W maximum
  • Application Control: HTML5 browser based
  • Operating Temperature Range: 20 to 104°F (-6.7 to 40°C)
  • Storage Temperature Range: 20 to 165°F (-29 to 74°C)
  • Thermal Dissipation
    • Maximum: 6.8 W (23.0 BTU/hr)
    • Typical: 6.0 W (20.8 BTU/hr)
  • Frequency Response: 20 Hz to 20 kHz +1, -1.5 dB
  • Dante Audio Flows: Sampling Rate: 24-bit/48 kHz
  • USB Audio: 16-, 24-bit/44.1, 48 kHz
  • Latency:
    • Does not include Dante latency
    • Analog to Analog: 0.98 ms
    • Analog to Dante 0.39 ms
    • Dante to Analog: 0.72 ms
    • Dante to Dante: 0.14 ms
  • Dynamic Range:
    • 20 Hz to 20 kHz, A-weighted, typical
    • Analog to Dante: 113 dB
    • Dante to Analog: 117 dB
  • Equivalent Input Noise:
    • 20 Hz to 20 kHz, A-weighted, input terminated with 150 Ohms
    • Line: -86 dBV
    • Aux: -98 dBV
  • Total Harmonic Distortion (THD): <0.05% @ 1 kHz, 0 dBV input, 0 dB analog gain
  • Common Mode Rejection Ratio: >70 dB, 150 Ohms balanced source @ 1 kHz
  • Impedance: 10.6 kOhms
  • Input Clipping Level:
    • Line: +27 dBV
    • Aux: +15 dBV
  • Output Clip Level:
    • Line: +20 dBV
    • Aux: 0 dBV
    • Mic: -26 dBV
  • Digital Signal Processing (DSP):
    • Per Channel: Equalizer (4-band Parametric, Analog and USB output channels only), Mute, Limiter, Gain (140 dB range)
    • System: Matrix mixer
  • Networking: Cat 5e or higher (shielded cable recommended)
  • Dimensions: 1.6 x 5.5 x 5.0" (4 x 14 x 12.8 cm)
  • Weight: 1.5 lb (672 g)
Additional Information
Product Type:
Video Conferencing