Shure MXA920 Ceiling Array Microphone, Square (White)
ShurePricing available upon request
Automatic Coverage™ technology requires no setup yet gives you precise control of audio capture if desired. With next-generation array architecture for enhanced directional pickup and more natural speech, the MXA920 ceiling array microphone is easy to use and quick to deploy for AV conferencing, camera tracking, voice lift, or sound reinforcement.
How it works?
Automatic Coverage.TM technology captures the talkers you want to hear while avoiding sounds in other areas, without aiming pickup lobes
Out of the box, MXA920 covers up to a 30 by 30 foot seating area with no setup at all.
To capture talkers only in specific locations, drag and drop up to 8 adjustable coverage areas using the built-in web interface.
Capture simultaneous talkers in different areas at the same time.
You can also turn Automatic Coverage technology off and use Steerable CoverageTM technology to place 8 pickup lobes with 8 individual audio outputs, plus an automix – just like an MXA910.
Onboard IntelliMix DSP applies automatic mixing, echo cancellation, noise reduction, and automatic gain control for a pristine audio mix.
Why it's better?
Next generation array architecture delivers enhanced low frequency directionality and the most natural speech quality.
Advanced talker localization algorithm instantly reports the exact position of each talker for the most accurate camera tracking possible.
Precise coverage control provides exceptional isolation between microphone lobes and loudspeakers, guaranteeing the maximum sound level possible in voice lift and sound reinforcement applications.
In larger spaces, Designer system configuration software helps you configure MXA920’s with other Microflex Ecosystem devices.
Choose Teams-certified bundles with the ANIUSB-MATRIX, P300-IMX, or IntelliMix Room DSP and MXN5C networked loudspeaker.
Technical Specifications
- General
- Coverage Type: Automatic or steerable
- Power Requirements: Power over Ethernet (PoE), Class 0
- Power Consumption: 10.1 W maximum
- Control Software: Designer or web application
- Plenum Rating:
- MXA920-S: UL2043 (Suitable for Air Handling Spaces)
- MXA920-R: Not rated
- MXA920-S: UL2043 (Suitable for Air Handling Spaces)
- Dust Protection: IEC 60529 IP5X Dust Protected
- Operating Temperature Range: −6.7°C (20°F) to 40°C (104°F)
- Storage Temperature Range: −29°C (−20°F) to 74°C (165°F)
- Coverage Type: Automatic or steerable
- Networking
- Cable Requirements: Cat5e or higher (shielded cable recommended)
- Connector Type: RJ45
- Cable Requirements: Cat5e or higher (shielded cable recommended)
- Audio
- Channel Count
- Automatic coverage on: 2 total channels (1 output, 1 AEC reference in channel)
- Automatic coverage off: 10 total channels (8 independent transmit channels, 1 automix output, 1 AEC reference in channel)
- Automatic coverage on: 2 total channels (1 output, 1 AEC reference in channel)
- Sampling Rate: 48 kHz
- Bit Depth: 24
- Sensitivity at 1 kHz: −1.74 dBFS/Pa
- Maximum SPL (Relative to 0 dBFS overload): 95.74 dBSPL
- Signal-to-Noise Ratio (Ref. 94 dBSPL at 1 kHz): 75.76 dB Aweighted
- Latency:
- Direct outputs (Automatic coverage off): 15.9 ms
- Automix output (Includes IntelliMix processing): 26.6 ms
- Direct outputs (Automatic coverage off): 15.9 ms
- Self Noise: 18.24 dB SPLA
- Dynamic Range: 77.5 dB
- Digital Signal Processing: Automatic mixing, acoustic echo cancellation (AEC), noise reduction, automatic gain control, compressor,
delay, equalizer (4band parametric), mute, gain (140 dB range) - Acoustic Echo Cancellation Tail Length: Up to 250 ms
- Frequency Response: 125 Hz to 20,000 Hz
- Channel Count
- Product Type:
- Video Conferencing