Shure DH5 DuraPlex Omnidirectional Subminiature Headset Microphone (Black)

Shure DH5 DuraPlex Omnidirectional Subminiature Headset Microphone (Black)

Shure
SKU:
DH5B/O-MTQG

Pricing available upon request

Up to 2 year(s) limited warranty against manufacturer defects from Shure Singapore. During the warranty period, the manufacturer's appointed authorised service centre will, at its sole discretion (a) repair the product using new or refurbished parts, (b) replace the product with a new or refurbished product.
Current Stock:
Description

The black Shure DH5 DuraPlex is an omnidirectional miniature headset microphone equipped with a TA4F connector for compatible Shure wireless bodypack transmitters. Built for the rigors of professional use, this durable mic offers a neutral, full-range sound ideal for capturing speech, dialog, and singing in broadcast, presentation, and theater applications.

The DH5 DuraPlex features a 5mm miniature capsule on a silicone boom pivot system that can be discreetly placed on either the left or right ear. The mic offers high gain before feedback, making it well suited for speech and dialog at events with loud sound reinforcement. To compensate for any potential loss of high end when positioning the mic, a presence cap is included that boosts the 10 kHz range about 3 to 4 dB for added clarity and intelligibility.

Designed to stand up to adverse conditions, the mic is equipped with a long-lasting, fully paintable, 1.6mm Shure Plex cable. The dual-redundant ground in the cable serves as secondary shield, giving it unprecedented durability and immunity to memory effect and kinks.

Key Features

  • 5 mm omnidirectional subminiature design for discrete placement and improved gain-before-feedback 
  • IP57 dust-resistant, waterproof rated 
  • Neutral, full sound quality for film, broadcast, speech, theater, and performance applications 
  • Advanced 1.6 mm Shure Plex cable: 
    • Dual redundant ground in cable serves as secondary shield for unprecedented longevity 
    • Immune to memory effect and kinks 
    • Fully paintable with typical theater paints, pens, and polishes 
  • Presence Cap included for tailored frequency response provides additional vocal clarity and presence (3-4 dB boost near 10 kHz) 
  • Available in three colors: Black, Cocoa, Tan 
  • Available in two connector types: TA4F (mTQG) and LEMO 
  • Kit includes the following accessories: Case, Foam Windscreen, Snap-fit Windscreen, Single Tie Clip, Sticky Mount, TQG Locking Collar (mTQG/TA4F SKUs only) 

Technical Specifications

  • Microphone Capsule: MEMS
  • Polar Pattern: Omnidirectional
  • Frequency Response: 20 Hz to 20 kHz
  • Sensitivity: –42.5 dBV (7.5 mVRMS) @ 1 kHz
  • Self-Noise: 31 dB SPL-A (A-weighted, Equivalent Acoustical)
  • Signal-to-Noise Ratio: 63.0 dB
  • Maximum SPL: 132.0 dB SPL (1 kHz @ 1% THD, typical)
  • Dynamic Range: 101.0 dB
  • Microphone Current Draw: 220 µA, maximum
  • Bias Voltage Recommended Operating Voltage: 5 VDC
  • Housing: Molded ABS
  • Polarity:
    • MTQG: Positive Pressure on diaphragm produces positive voltage on Pin 3 with respect to Pin 1
    • LEMO: Positive pressure on diaphragm produces positive voltage on Pin 3 with respect to Pin 1
  • Cable Diameter: 1.6 mm
  • Cable Length: 66.0 in (1.67 m)
  • Net Weight: 20 g (0.7 oz)
  • Capsule Dimensions (L × D): 14.5 mm × 5.2 mm
  • Boom Length: 13.6 cm

What's Included

  • 1 Case
  • 1 Frequency Cap
  • 1 Foam Windscreen
  • 1 Snap-fit Windscreen
  • 1 Single Tie Clip
Additional Information
Product Type:
Microphone