Panasonic PT-RZ24K 20000lms WUXGA Laser Projector with ET-D3LEW50 Lens (Black)

Panasonic
SKU:
PT-RZ24K

Pricing available upon request

Warranty: 3 Years
Current Stock:

The World’s Smallest and Lightest 20,000 lm* 3-Chip DLP™ 4K* Projector

PT-RQ25K Series is 40 % smaller and 35 % lighter*3 than PT-RQ22K and only a little larger than our 10,000-lm-class 1-Chip DLP™ models. Unlock time-saving workflow efficiencies that save resources with transport, handling, and installation easily managed with a team of two. Explore exciting spatial design possibilities in locations previously too small to fit a 3-Chip DLP™ projector. Innovations such as miniaturized optical engine and power supply, high-efficiency cooling system, and revised optical unit materials have resulted in a game-changing design that brings elite 3-Chip DLP™ performance to events of any scale.

Note: Based on publicly available dimensions and weight for DLP™ laser projectors with 16,000 lm brightness and above as of January 2022.

*1 Please refer to specifications table for brightness value of individual models. Measurement, measuring conditions, and method of notation all comply with ISO/IEC 21118: 2020 international standards. Value is average of all products when shipped.
*2 PT-RQ25K/RQ18K only with Quad Pixel Drive [ON].
*3 Estimated values by cabinet volume and weight (excluding lens) according to Panasonic research.

Remote Preview LITE for Monitoring During Events

Remote Preview LITE lets the projectionist confirm video-signal integrity by viewing thumbnails of the input signal on a laptop prior to projection. Accessed via software or web browser, Remote Preview LITE works with the projector in Standby or with the shutter on. It’s useful at events such as concerts where opportunities to check content on screen are limited due to stage traffic, soundchecks, sunlight on the screen, and other logistical factors. Remote Preview LITE reduces chance of errors before the performance, and if an error is detected, helps narrow down the possible cause to the signal.

Wide Scalability with Intel® SDM-ready Slot

Intel® SDM-ready slot integrates optional proprietary or third-party* function boards. These function boards reduce installation complexity and make it easier to adapt, scale, and expand your projector’s connectivity to suit different applications now and in the future. The projector works with Panasonic’s DIGITAL LINK Terminal Board (TY-SB01DL), 12G-SDI Terminal Board (TY-SB01QS), and Wireless Presentation System PressIT Receiver Board (TY-SB01WP), as well as selected third-party1 PC boards, terminal boards, and AVoIP boards.

*Third-party Intel® SDM-specified function boards sold separately. A list of third-party function boards tested for compatibility with PT-RQ25K Series is to be announced. Panasonic cannot guarantee operation of third-party devices with PT-RQ25K Series.

Smooth 4K* Images with Quad Pixel Drive

Quad Pixel Drive, Panasonic’s original 2-axis pixel-quadrupling technology, shifts each pixel vertically and horizontally at high speed to produce sharp, clear, detail-rich images at a maximum resolution of 3840 x 2400 pixels (16:10)*. Combined with high DMD pixel density and narrow aperture ratio, Quad Pixel Drive creates smooth 4K* images with immersive depth and definition.

* PT-RQ25K/RQ18K only with Quad Pixel Drive [ON].

Newly Improved Dynamic Contrast

Panasonic’s Dynamic Contrast technology has evolved to 25,000:1*. In addition to the high contrast ratio, Dynamic Contrast gains new image-scene analysis that enables more detailed recognition of light and dark areas and better contrast expression. The technology analyzes content frame-by-frame and digitally adjusts light output according to the contrast requirements of each scene.

* Full On/Full Off with Dynamic Contrast set to [3]. Measurement, measuring conditions, and method of notation all comply with ISO/IEC 21118: 2020 international standards.

Multi Laser Drive Engine with Failover Circuitry

Multiple laser modules are equipped with Panasonic’s unique Failover Circuitry. In the unlikely event a single diode fails, Failover Circuitry continues to supply electricity to the functional diodes in the series, minimizing brightness loss. If the same issue were to occur in projectors without Failover Circuitry, all diodes in the module may shut down, resulting in significant loss of brightness. Multi Laser Drive Engine gives peace of mind in mission-critical situations when image display cannot be interrupted.

Key Features

  • Compact Form-Factor Streamlines Workflow
  • Create an Engaging Visual Experience
  • Maintenance-free for Peace of Mind
  • 3-Chip DLP™ WUXGA Laser Projector
  • 20,000 Lumen Brightness

Technical Specifications

 

Projector type 3-Chip DLPTM projector
Display method DLPTM chip x 3, DLPTM projection system
Display Device -> Panel size 20.3 mm (0.8 in) diagonal (16:10 aspect ratio)
Display Device -> Number of pixels 2,304,000 (1920 x 1200 pixels) x 3
Light source Laser diode
Light output *1 *2 20,000 lm
Light output (ANSI) *3 20,000 lm
Light output (Center) *4 21,000 lm (Center)
Time until light output declines to 50 % -> NORMAL *5 20,000 hours [NORMAL]
Time until light output declines to 50 % -> ECO *3 24,000 hours [ECO]
Time until light output declines to 50 % -> QUIET *4 20,000 hours [QUIET]
Resolution WUXGA (1920 x 1200 pixels)
Contrast Ratio (typ.) *2 25,000:1 (Full On/Full Off, Dynamic Contrast [3])
Screen size (diagonal) 1.78–25.40 m (70–1000 in), 1.78–15.24 m (70–600 in) with ET-D75LE8/ ET-D3LET80, 3.05–15.24 m (120–600 in) with ET-D75LE95, 5.08–15.24 m (200–600 in) with ET-D3LEU100/D3LEW200
Center-to-corner zone ratio *2 90%
Lens Optional (no lens included with this model)
Lens shift -> Vertical(from center of screen)  ±66 % (52 % with ET-D75LE6/ET-D3LEW60, +71 % / +93 % with ET-D75LE95, ±66 % with ET-D3LEU100, ±57 % with ET-D3LEW200) (powered)
Lens shift -> Horizontal(from center of screen)  ±24 % (18 % with ET-D75LE6/ET-D3LEW60, ±14 % with ET-D75LE95, -25 % / +30 % with ET-D3LEU100,±18 % with ET-D3LEW200) (powered)
Keystone correction range Vertical: ±45 ° (± 40 ° with ET-D75LE10/ET-D3LEW10/ET-D75LE20/ET-D3LES20, ±28 ° with ET-D75LE6/ET-D3LEW60,±22 ° with ET-D3LEW50, ±15 ° with ET-D3LEW200, ±8 ° with ET-D3LEU100, +5 ° with ET-D75LE95),Horizontal: ±40 ° (±15 ° with ET-D3LEW50/ET-D75LE6/ET-D3LEW60, ±5 ° with ET-D3LEU100/ET-D3LEW200,0 ° with ET-D75LE95)When [VERTICAL KEYSTONE] and [HORIZONTAL KEYSTONE] are used simultaneously, correction cannot be made exceeding a total of 55 °.
Installation Ceiling/floor, front/rear, free 360-degree installation
Terminals -> HDMI IN HDMI x 2 (Deep Color, compatible with HDCP 2.3, 4K/60p signal input*5)
Terminals -> DisplayPort IN DisplayPortTM x 1 (Deep Color, compatible with HDCP 2.3, 4K/60p signal input*5)
Terminals -> MULTI PROJECTOR SYNC IN
Terminals -> MULTI PROJECTOR SYNC OUT
Terminals -> MULTI SYNC IN/ 3D SYNC 1 IN/OUT (dual purpose) BNC x 1
Terminals -> MULTI SYNC OUT/ 3D SYNC 2 OUT (dual purpose) BNC x 1
Terminals -> SERIAL IN D-sub 9-pin (female) x 1 for external control (RS-232C compliant)
Terminals -> SERIAL OUT D-sub 9-pin (male) x 1 for link control (RS-232C compliant)
Terminals -> REMOTE 1 IN M3 stereo mini-jack x 1 for wired remote control
Terminals -> REMOTE 1 OUT M3 stereo mini-jack x 1 for link control (for wired remote control)
Terminals -> REMOTE 2 IN D-sub 9-pin (female) x 1 for external control (parallel)
Terminals -> LAN RJ-45 x 1 for network connection, PJLinkTM(Class 2) compatible, 10Base-T/100Base-TX, Art-Net compatible
Terminals -> DC OUT USB Type A x 1 (for power supply, DC 5 V, 2 A)
Terminals -> USB TYPE A USB connector (Type A) x 1 for optional AJ-WM50 Series Wireless Module/USB memory
Terminals -> SLOT Open slot for function boards, Intel® SDM compatible
Power supply AC 100 V–120 V / AC 200 V–240 V, 50 Hz/60 Hz (The maximum value of light output is limited to 15,000 lm or less when using the projector with AC 100 V to AC 120 V. Other limitations apply.*6)
Maximum power consumption AC 200 V–AC 240 V : 1,470 W(1,520 VA)AC 100 V–AC 120 V : 1,060 W(1,090 VA)
On-mode power consumption(Operating mode) -> Normal [NORMAL] 1,310 W
On-mode power consumption(Operating mode) -> Eco [ECO] 1,020 W
On-mode power consumption(Operating mode) -> Quiet [QUIET] 1,010 W
Cabinet materials Molded plastic
Filter No
Operation noise -> Normal *2 46 dB [NORMAL]
Operation noise -> Eco *2 43 dB[ECO]
Operation noise -> Quiet *2 46 dB [QUIET]
Dimensions (W x H x D) Approx. 550 x 220 x 570 mm (21 5/8˝ x 8 11/16˝ x 22 7/16˝ ) (not including protruding parts)
Dimensions (W x H x D) -> Width (not including protruding parts) 550 mm (21 5/8˝)
Dimensions -> Height (not including protruding parts) 220 mm (8 11/16˝)
Dimensions -> Depth (not including protruding parts) 570 mm (22 7/16˝)
Weight *8 Approx. 35 kg (77.2 lbs)
Operating environment -> Operating temperature 0–45 °C (32–113 °F)
Operating Environment -> Operating humidity (No condensation) 10–80 % (no condensation)
Applicable software Logo Transfer Software, Multi Monitoring & Control Software, Projector Network Setup Software, Early Warning Software,Geometry Manager Pro, Smart Projector Control for iOS/AndroidTM
Body Colour Black
Gross Dimensions (W x H x D in mm) RZ24KU/RZ24KEJ: 792 x 794 x 455 mm
RZ24KUY/RZ24KE; 770 x 772 x 445 mm
Gross Weight (Kg) RZ24KU: 44.0 kg (96.9 lbs)
RZ24KUY: 42.2 kg (93.0 lbs)
RZ24KE: 42.4 kg (93.6 lbs)
RZ24KEJ: 44.2 kg (97.5 lbs)
ANSI (Lumens):
20000
Resolution:
WUXGA (1920 x 1200)
Product Type:
Projector