Kramer VW-4 4 Output Video Wall Driver

VW−4 is a 4−output video wall driver designed to quickly and easily configure and manage video walls. Use one VW−4 device to create any wall configuration with up to 4 displays, for example, a 2x2, 4x1, 1x4, 2x1, 3x1 video wall. Connect additional devices to create walls of any size and configuration of up to 64 displays. Configure a single or multiple device setup using the VW−4 app via Ethernet or RS−232, or quickly configure a basic setup using the local dip switches.

•  Scalable Video Walls — Create and manage a video wall of up to 4 displays or, by adding devices, create video walls of up to 64 displays.
•  Quick, Basic, Local Setup — Use front panel DIP–switches for basic setup of video walls up to 16 displays.
•  Full Feature Configuration — Use the VW–4 app via Ethernet or RS–232 to set up video walls of up to 8x8 displays. Also use the app for the following: bezel corrections, HDCP status, factory reset, upgrading firmware, viewing network settings and copying EDID.
•  Content Protection — Supports HDCP 2.2 on the input and loop output and HDCP 1.4 on the main outputs. HDCP can be disabled on the input.
•  EDID Support — Upload EDID files, copy any output EDID to the input, and select from several built–in EDID files.
•  Reliable Video — Features constant output sync and auto–sync off option that stops or delays the 5V shutoff when no input is detected.
•  Auto Display Powering — CEC capabilities turn ON or OFF the connected displays according to the status of the input video.
•  Easy Installation — Compact MegaTOOLS® fan–less enclosure for surface mounting or side–by–side mounting of 2 units in a 1U rack space with the recommended rack adapter.

Key Features

• Quick front panel setup
• PC App for comprehensive setup
• Up to 64 displays with additional devices
• HDCP and EDID support
• Constant output sync
• CEC auto display control

Technical Specifications

• Inputs: 1 HDMI: On a female HDMI connector
• Outputs:
  
  • 4 HDMI: On female HDMI connectors
  • 1 HDMI Loop: On a female HDMI connector
• Ports:
  
  • 1 Ethernet: On an R–J45 connector
  • 1 RS-232: On a 3–pin terminal block connector
  • USB: On a USB type–A connector
• Video:
  
  • Max Input Resolution: 4K@60Hz (4:4:4)
  • Max Input Data Rate: 18Gps
  • Output Resolution: 1080p
  • Content Protection on Input and Loop Output: HDCP 2.2
  • Content Protection on Main Outputs: HDCP 1.4
• User Interface:
  
  • Indicators: I/O detection and power LEDs
  • Controls: DIP–switches for basic setup, computer app for comprehensive setup via Ethernet or RS–232, firmware upgrade via USB
• Power:
  
  • Source: 5V DC
  • Consumption: 2.9A
• Environmental Conditions:
  
  • Operating Temperature: 0 to + 45°C (32 to + 113 °F), 10% to 90%, non–condensing
  • Storage Temperature: –20 to +70°C (–4 to + 158 °F), 10% to 90%, non–condensing
  • Humidity: 10% to 90%, non–condensing
• Product Dimensions: 19.00cm x 19.50cm x 2.70cm (7.48" x 7.68" x 1.06" ) W, D, H
• Product Weight: 0.9kg (1.9lbs) approx.
• Shipping Dimensions: 35.10cm x 21.20cm x 7.20cm (13.82" x 8.35" x 2.83" ) W, D, H
• Shipping Weight: 1.4kg (3.1lbs) approx.

What's Included

• Power adapter
• Bracket set
• Rubber feet