Kramer VSM-4X4X 4x4 Matrix Switcher, Videowall & Multiviewer

Kramer's VSM 4x4X is a 4X4 seamless matrix switcher that can also be used as a video wall driver (2X2 or 1X4), a quad−viewer, or a 4 picture multi−viewer.

The unit allows instantaneous switching between inputs (that is, with a clean, frame−to−frame video cut). The VSM 4x4X supports HDMI 2.0 and HDCP 2.2, with resolutions up to 4K60 4:4:4, per−port HDCP and EDID settings, passing of 4 channels of embedded audio, and analog stereo de−embedded audio for each of the 4 outputs.

•  PixPerfect™ Scaling Technology — Kramer’s precision pixel mapping and high quality scaling technology.
•  Matrix Switching Modes — Truly seamless switching mode (zero–time video cuts), or fade–through–black mode (enabling independent output resolutions).
•  Multiple Aspect Ratio Selections — Full and best fit.
•  4 Preset Memory Locations — For each operation mode for quick access to common IN OUT configurations.
•  Non–Volatile Memory — Saves final settings.
•  Built–in Noise Reduction and Picture Enhancement Features
•  HDMI Support — 4K@60Hz, Deep Color, x.v.Color™, 7.1 PCM, Dolby TrueHD, DTS–HD, as specified in VHDMI 2.0.
•  Selectable Operation Modes — 4x4 matrix switcher, video wall (2x2 or 1x4 configuration), multi–view display Split, Side–by–Side, PIP, POP, Stacked or Quad display.
•  Bezel Correction Options — In video wall mode.
•  Constant Output Sync — For all modes of operation.
•  Built–in Video ProcAmp — Color, hue, sharpness, noise, contrast and brightness set individually for each input.
•  Firmware Upgrade — Ethernet based, via a user–friendly software upgrade tool.
•  Advanced EDID management per Input
•  Video inputs and Outputs — 4 HDMI Inputs and 4 Scaled HDMI Outputs.
•  Audio Outputs — 4 balanced audio outputs with independent volume settings per output, embedded audio on the HDMI inputs and outputs.

Key Features

• Modes — Seamless 4X4 matrix, video wall, multi–viewer (PIP(s), P&P(s), quad, etc)
• Bezel Correction — In video wall mode
• Max Resolutions — 4k60 4:4:4
• Built–in ProcAmp
• Control — RS–232, Ethernet

Technical Specifications

• Inputs: 4 HDMI: On female HDMI connectors
• Outputs: 4 HDMI: On female HDMI connectors
• Ports:
  • 4 Balanced Stereo Line Level: On 5–pin terminal block connectors
  • 1 RS-232: On a 3–pin terminal block
  • 1 Ethernet: On an RJ–45 female connector
• Video:
  
  • Max Bandwidth: 18Gbps (6Gbps per graphic channel)
  • Max Resolution: 4K @60Hz (4:4:4) 24bpp resolution
  • Compliance: HDMI 2.0 and HDCP 2.2
  • Latency: Up to 20ms
• Controls: Front Panel: Output and input selector buttons, system set up buttons (matrix, video wall and multi–view), store and recall buttons, display identify button, reset button and panel lock button
• Analog Audio:
  
  • Max Level: 4.1Vrms
  • Impedance: 500Ω
  • Bandwidth: 20Hz — 20kHz
  • Crosstalk: –114dB
  • THD + N: 0.005% @1kHz at nominal level
  • S/N Ratio: –89dB, 20Hz — 20kHz
  • Coupling: DC
• Power:
  
  • Consumption: 100–240V AC, 98VA max
  • Heat Dissipation: 55W (188BTU/hr)
• Environmental Conditions:
  
  • Operating Temperature: 0° to +40°C (32° to 104°F)
  • Storage Temperature: –40° to +70°C (–40° to 158°F)
  • Humidity: 10% to 90%, RHL non–condensing
• Regulatory Compliance (Standards Compliance):
  
  • Safety: CE, FCC
  • Environmental: RoHs, WEEE
• Enclosure:
  
  • Size: 19” 1U
  • Type: Aluminum
  • Cooling: Fan Ventilation
• Product Dimensions: 19" x 7.20 x 1U (43.6cm x 18.30cm x 4.36cm) W, D, H
• Product Weight: 1.9kg (4.1lbs) approx.
• Shipping Dimensions: 55.00cm x 27.60cm x 10.70cm (21.65" x 10.87" x 4.21" ) W, D, H
• Shipping Weight: 2.9kg (6.4lbs) approx.

What's Included

• Power adapter cord