Kramer VP-554X 11x4:2 Presentation Boardroom Router / Scaler System

The VP−554X is a high−performance presentation scaler/switcher with 4 pairs of independent and scaled outputs. It includes multiple HDMI and HDBaseT inputs – supporting resolutions up to 4K – as well as a legacy VGA input, and each of the 4 outputs is mirrored on both HDMI and HDBT.

VP−554X supports embedded and balanced analog stereo audio, up to 2 microphone inputs, DSP audio features and a built−in stereo power amplifier. It includes a built−in Ethernet switch and supports legacy RS−232, and IR, Ethernet and RS−232 tunneling over HDBT.

*  Pix–Perfect™ Scaling Technology — Kramer’s precision pixel mapping and high–quality full up — and down–scaling technology.
*  High–Performance Switcher/Scaler — Scales the video and provides constant output sync to prevent signal disruption when switching between inputs and when no video is detected.
*  HDCP 2.3 Compliance — The HDCP (High Definition Content Protection) license agreement allows copy–protected data on the HDMI input to pass to HDCP compliant outputs.
*  Resolutions — Up to 4K60 4:4:4 on the HDMI ports; up to 4K60 4:2:0 on the HDBaseT ports; and up to 1080p60 on the VGA input.
*  System Range for the HDBT inputs and outputs — Up to 100m for 4K; 180m for 1080p.
*  4x1 USB Switcher — Can be set to follow the switching of the video layer or as an independent switcher.
*  Audio DSP Features, including input and output level adjustments, microphone talkover, mixing, and EQ.
*  Analog & Embedded Audio Support.
*  Built–in Power Amplifier — 2x20W.
*  Built–in Video ProcAmp — Color, hue, sharpness, noise, contrast, and brightness.
*  Option for video wall output mode.
*  Multiple Control Options — Front panel buttons with OSD, RS–232, Ethernet and built–in Web pages.
*  Includes numerous filters and algorithms for eliminating picture artifacts.
*  Converts to 4K60 4:2:0 on HDBaseT outputs when its corresponding mirrored HDMI output resolution is 4K60 4:4:4 (similarly for 4K50).
*  HDMI Support — HDR10, CEC, xvYCC color (on input), Dolby TrueHD/DTS–HD Master Audio (by–pass), as specified in HDMI 2.0 as specified in HDMI 2.0.
*  Multiple aspect ratio selections.
*  Advanced EDID management per input.
*  Includes non–volatile memory that retains the last settings, after switching the power off and then on again.
*  STO and RCL buttons, a RESET TO XGA/1080P button (to hardware–reset the output resolution); and a PANEL LOCK button.
*  Built–in video Proc–Amp — color, hue, sharpness, contrast, and brightness are set individually for each output.
*  An OSD (On–Screen Display) — for making adjustments — that can be located anywhere on the screen.
*  Efficient power–saving features.
*  Advanced EDID management per input.
*  Includes non–volatile memory that retains the last settings, after switching the power off and then on again.
*  11 input buttons for switching a selected input to an output.
*  Scaled video outputs — 4 pairs of mirrored HDMI and HDBT outputs.
*  Embedded audio on the HDMI and HDBT inputs and outputs.
*  11 input buttons for switching a selected input to an output.
*  Embedded audio on the HDMI and HDBT inputs and outputs.
*  Scaled video outputs — 4 pairs of mirrored HDMI and HDBT outputs.

Key Features

* Pix–Perfect™ Scaling Technology
* HDBaseT Input and Output Range — up to 100m at 4K@60 (330ft)
* PoE support for each HDBaseT port
* Minimal latency, Clean Switching Transitions
* Rich Audio Processing
* Selectable Microphone Talkover or Mix Modes
* Built–in Power Amplifier
* Built–in ProcAmp
* 2x2 Videowall option
* Front panel control with OSD (On Screen Display)
* Control — RS–232, Ethernet with built–in Web pages
* 4x1 USB Switcher

Technical Specifications

* Inputs:
* 6 HDMI: On female HDMI connectors
* 1 PC: On a 15–pin HD connector
* 4 HDBT: On RJ–45 female connectors
* 8 Stereo Analog Balanced Audio: On 5–pin terminal block connectors
* 2 Unbalanced Mono Audio: On 3–pin terminal block connectors

* Outputs:
* 4 HDMI: On female HDMI connectors
* 4 HDBT (mirrored with each HDMI output): On RJ–45 female connectors
* 5 Balanced Stereo Audio: On 5–pin terminal block connectors
* 1 Stereo Balanced Audio: On a 4–pin large terminal block

* Line Level Input:
* Impedance: 16.6kΩ
* Maximum level: +14.7dBu (4.2Vrms)
* Sensitivity: Full power @ +8.7dBu (2.1Vrms) for OUT =1.9Vrms

* Microphone Level Input:
* Impedance: 47kΩ
* Sensitivity: Full power @ — 37dBu (11mVrms) for OUT =1.9Vrms
* Phantom Power: 48Vdc on/off per input

* Line Level Output:
* Impedance: 500Ω
* Frequency Response: 20Hz — 20kHz @ +/–1dB
* S/N Ratio: >75dB, 20Hz — 20kHz (unweighted),
* S/N Ratio: >81dB, 20Hz — 20kHz (A–weighted)
* Audio THD + Noise: <0.014%, 20Hz — 20kHz (unweighted),
* Audio THD + Noise: <0.0092%, 20Hz–20kHz (A–weighted)
* Crosstalk: <–93 dB, 20Hz to 20kHz

* Amplifier:
* Output Power: 2 x 20W into 4Ω
* Amplifier Class: D
* Maximum Voltage Gain: 26dB BTL
* Dynamic Range: 103 dB A–Weighted
* Frequency Response: 20Hz — 20kHz @ +/–1dB
* S/N Ratio: >68 dB, 20Hz — 20kHz (unweighted)
* Audio THD + Noise: <0.037%, 20Hz — 20kHz (unweighted)
* Crosstalk: <–77 dB, 20Hz to 20kHz

* Ports:
* 4 IR (for HDBT Outputs): On terminal block connectors for IR link extension
* 4 IR (for HDBT Inputs): On terminal block connectors for IR link extension
* 4 RS-232 (for HDBT Outputs): On terminal block connectors for serial link extension
* 4 RS-232 (for HDBT Inputs): On terminal block connectors for serial link extension
* 5 USB: 4 USB Hosts on USB–B connectors
* 5 USB: 1 USB Client on a USB–A connector
* 1 USB: On a USB–A connector for firmware upgrading
* 2 RS-232: On 3–pin terminal block connectors
* 4 100BaseT Ethernet: On RJ–45 female connectors for device control and LAN extension

* Video:
* Max Resolution: HDMI: 4K60 4:4:4
* Max Resolution: HDBT: 4K60 4:2:0
* Max Resolution: PC (VGA):1080p
* Compliance: Up to HDMI 2.0 and HDCP 2.2

* Extended Ethernet: Max Transmission Bandwidth: 100Mbps
* Extended RS-232: Baud Rate: 300 to 115200
* Control RS-232: Baud Rate: 115200
* Power:
* Max, Power Consumption: 190VA
* Storage Temperature: –40° to +70°C (–40° to 158°F)

* Environmental Conditions:
* Operating Temperature: 0° to +40°C (32° to 104°F)
* Humidity: 10% to 90%, RHL non–condensing

* Regulatory Compliance (Standards Compliance):
* Safety: CE, FCC
* Environmental: RoHs, WEEE

* Enclosure:
* Size: 19” 2U
* Type: Aluminum
* Cooling: Fan ventilation

* Product Dimensions: 43.69cm x 23.60cm x 8.80cm (17.20" x 9.29" x 3.46" ) W, D, H
* Product Weight: 5.0kg (11.0lbs) approx.
* Shipping Dimensions: 52.60cm x 47.50cm x 18.40cm (20.71" x 18.70" x 7.24" ) W, D, H
* Shipping Weight: 6.3kg (13.9lbs) approx.

What's Included

* Power adapter cord