Kramer KDS-8 Zero Latency 4K HDR SDVoE Video Streaming Transceiver over Copper

Kramer
SKU:
59-001890

Pricing available upon request

Current Stock:

KDS−8 is a high−performance, zero latency, 4K@60Hz (4:4:4) video streaming transceiver for streaming via Ethernet over copper cable. KDS−8 can be set as either an encoder or decoder. As an encoder, it encodes and streams the HDMI input along with IR, RS−232, and analog audio, over an IP network. As a decoder, it receives the encoded signal and decodes it for output.

  •  High–Performance Video Streaming Transceiver — Streams up to 4K@60Hz (4:4:4) resolution signals over a 10G network interface, providing lossless compression.
  •  Maximum Compatibility — Fully standard and compliant SDVoE™ codec, enables compatibility with other software and hardware streaming platforms.
  •  Streamlined Management and Configuration — Kramer KDS–8–MNGR device (sold separately) provides a central point of management and enables creating multiple virtual matrices, video walls and multi–view configurations. In addition, KDS–8–MNGR supports preset configurations that can be activated using Kramer Control.
  •  HDCP 2.2 Compliant, HDR Support, Genlock and Fastswitch Modes Support
  •  High–Speed 10G Network Switch — Managed switch provides: multicast, jumbo frames, IGMP snooping and fast leave.
  •  Analog Audio Embedding — Provides an unbalanced analog audio port for embedding audio into the streaming signal.
  •  Bi–directional IR over IP — Control an IR device located on the decoder side from the encoder and vice versa.
  •  Bi–directional RS–232 over IP — Control a serial device located on the decoder side from the encoder and vice versa.
  •  Video Wall Support.
  •  Multiview Support
  •  Easy, Cost–Effective Maintenance — LED indicators for main power, Tx/Rx mode setting, HDMI video source detection, and Tx and Rx transmission enable easy local maintenance and troubleshooting.
  •  Simple System Management — Remote system management support to enable quick and efficient remote system and device life–cycle management.

Key Features

  • User configured as encoder or decoder
  • Max resolution — 4K@60Hz (4:4:4)
  • Fully standard and compliant SDVoE codec.
  • Streaming Support — Multicast, Unicast.
  • Powered by the network (PoE)
  • Video wall and multiview support
  • Managed by KDS-8-MNGR

Technical Specifications

  • Inputs:
    • 1 HDMI: On a female HDMI connector
    • 1 IR: On a 3.5mm mini jack. If you want to use the IR extension, it is necessary to order these accessories from Kramer: 3300–500028 PT–5R/T IR receiver cable 2m, 3.5mm mini jack, 3300–500029 PT–5R/T IR emitter cable 2m, and a 3.5mm mini jack
  • Outputs:
    • 1 HDMI: On a female HDMI connector
    • 1 IR: On a 3.5mm mini jack. If you want to use the IR extension, it is necessary to order these accessories from Kramer: 3300–500028 PT–5R/T IR receiver cable 2m, 3.5mm mini jack, 3300–500029 PT–5R/T IR emitter cable 2m, and a 3.5mm mini jack
  • Ports:
    • 1 10GbE Ethernet: On an R–J45 connector
    • 1 Unbalanced Stereo Audio: On a 3.5mm mini jack
    • 1 1GbE Ethernet: On an R–J45 connector
    • 1 RS-232: On a 3–pin terminal block connector
  • Video: Standards Compliance: 10/12–bit HDR (Point–to–Point and Genlock mode only), HDCP 2.2 &1.4, DVI 1.0,
  • Extension Line:
    • Signal Compression: Ultra–light compression, lossless for most content
    • Range: Up to 100m in point–to–point mode
  • Audio: Standards Compliance: Supports pass–through of audio formats including LPCM 2.0/5.1/7.1, Bitstream and HD Bitstream from HDMI sources. Analog audio supports 20 Hz~20 kHz, 24–bit 48 kHz sampling rates
  • Power:
    • Source: 12V DC
    • Consumption: 3A
    • PoE Budget: 25W (not including cable loss)
  • Environmental Conditions:
    • Operating Temperature: 0 to + 45°C (32 to + 113 °F), 10% to 90%, non–condensing
    • Storage Temperature: –20 to +70°C (–4 to + 158 °F), 10% to 90%, non–condensing
    • Humidity: 10% to 90%, non–condensing
  • Product Dimension: 23.10cm x 11.60cm x 2.50cm (9.09" x 4.57" x 0.98" ) W, D, H
  • Product Weight: 0.5kg (1.1lbs) approx.
  • Shipping Dimensions: 39.00cm x 20.20cm x 6.20cm (15.35" x 7.95" x 2.44" ) W, D, H
  • Shipping Weight: 1.2kg (2.6lbs) approx.
Product Type:
Transceivers