Audio-Technica ATW-1101/PRO8Hecw System 10 Digital Wireless Hypercardioid Headset Microphone System (2.4 GHz)

• The System 10 offers full-bandwidth, 24-bit/48 kHz digital audio with none of the audio artifacts associated with analog companding.
• The PRO 8HEcW headset microphone uses a pivot-mounted flexible mic boom that descends from either the left or right side. The headset features a low-visibility headband and cushioned support pads to provide a stable, secure fit.
• The dynamic microphone capsule delivers a natural sound optimized for speech intelligibility.
• The mic's hypercardioid polar pattern focuses audio capture tightly on the subject, reducing unwanted background noise and feedback. 

• Just power up the components, and the receiver automatically seeks out a clean frequency and pairs up with the transmitter, saving you the hassle of scanning and syncing.
• While in use, the system continually monitors activity in the 2.4 GHz Wi-Fi range and automatically switches to a clean frequency to avoid interference if necessary.

Lightweight, Portable Receiver Chassis

• The tabletop receiver chassis features lightweight, plastic housing designed to let you stack multiple receivers on top of each other for convenience.
• The chassis' front-panel LEDs show pairing statuses and warn you if the transmitter's input level is set too high and causing distortion.
• A System ID number display indicates which transmitter is associated with a given receiver.
• Rear-panel connections include balanced XLR and unbalanced 1/4" output connections as well as an output level control.

Lightweight Bodypack Transmitter

• The transmitter is housed in lightweight, plastic chassis equipped with a Hirose 4-pin locking connector and a belt clip.
• An internal input trim control can be set, using the included screwdriver, to match the sensitivity of your microphone or audio source for distortion-free input.
• With just a quick press, the power switch on the transmitter doubles as a mute function. This function can be locked out to prevent an accident.

Pairing Multiple Transmitters

• With this peer-to-peer system, the transmitter can only transmit to one receiver at a time. However, up to 8 transmitters can be paired with a receiver ahead of time. This is useful in situations when you have multiple speakers, one after another, and you need to have them miked up and ready to go. All you'll have to do is turn one transmitter off and the next one on.

• Space Diversity: The receiver compares the signal showing up at its two antennas and chooses the strongest one.
• Time Diversity: The transmitter sends the digital signal in two imperceptibly different time slots and compares the two.
• Frequency Diversity: The digital audio is sent over two different frequencies at the same time and the system chooses the cleaner one.

For optimal performance, users are encouraged to maintain as direct a line of sight as possible between the transmitter and receiver.

2.4 GHz Wi-Fi Band

• Unlike traditional analog wireless systems, the System 10 operates in the 2.4 GHz ISM band, away from interruptions and dropouts caused by TV and radio channel interference.

• For Presenters, Instructors & Performers
• Headset Mic + Bodypack Transmitter
• Triple-Diversity Tabletop Receiver
• 7-Hour AA Batteries
• Fixed Antennas
• Expandable to 8 Mic Channels/100' Range

Technical Specifications

• Overall System
  
  • Operating Frequencies: 2.4 GHz ISM band (2400 to 2483.5 MHz)
  • Frequency Response:
    • 20 Hz to 20 kHz
    • Depending on microphone type
  • Operating Range: 30 m (100') typical Open range environment with no interfering signals
  • Total Harmonic Distortion: <0.05% typical
  • Operating Temperature Range: 0° C to +40° C (32° F to 104° F) Battery performance may be reduced at very low temperatures
• Handheld Transmitter
  
  • RF Power Output: 10 mW
  • Spurious Emissions: Following federal and national regulations
  • Battery Type Two 1.5V AA (not included)
  • Battery Life >7 hours (alkaline) Depending on battery type and use pattern
  • Dimensions: 254.8 mm (10.03") long, 50.0 mm (1.97") diameter
  • Net Weight: 280 grams (9.9 oz) without batteries
• Body Pack
  
  • RF Power Output: 10 mW
  • Battery Life >7 hours (alkaline) Depending on battery type and use pattern
  • Battery Type Two 1.5V AA (not included)
  • Dimensions: 70.2 mm (2.76") W x 107.0 mm (4.21") H x 24.9 mm (0.98") D
  • Input Connections:
    • Four-pin Locking Connector
    • Pin 1: GND
    • Pin 2: INST INPUT
    • Pin 3: MIC INPUT
    • Pin 4: DC BIAS +9V
  • Net Weight: 100 grams (3.5 oz) without batteries
  • Spurious Emissions: Following federal and national regulations
• Receiver
  
  • Receiving System: Diversity (frequency/time/space)
  • Maximum Output Level:
    • XLR, balanced: 0 dBV
    • 1/4" (6.3 mm), unbalanced: +6 dBV
  • Power Supply: 100-240V AC (50/60 Hz) to 12V DC .5A (center positive) switched mode external power supply
  • Operating Temperature Range: 40° F (4° C) to 110° F (43° C)
  • Dimensions: 190.0 mm (7.48") W x 46.2 mm (1.82") H x 128.5 mm (5.06") D
  • Weight: 290 grams (10.2 oz)

What's Included

• Audio-Technica ATW-1101/H System 10 Digital Wireless Hypercardioid Headset Microphone System (2.4 GHz)
• Audio-Technica Pro 8HEcW Hypercardioid Dynamic Headworn Microphone
• Audio-Technica ATW-T1001 System 10 Digital Wireless Bodypack Transmitter (2.4 GHz)
• Audio-Technica ATW-R1100 System 10 Digital Tabletop Wireless Receiver (2.4 GHz)
• Audio-Technica Large Foam Windscreen for Headworn Microphone
• Audio-Technica Small Foam Windscreen for Headworn Microphone
• Audio-Technica AT8439 - Clothing Clip for Cable
• Power Supply